FT86SF Hater Pipe - 2013+ FR-S / BRZ / 86

Be the first to review this product

 

From: $280.00

To: $445.00

Price as configured: $0.00

Sometimes things can get a little out of hand at FT86SpeedFactory. This would be an example of one those times we fabbed up a Hood Exit Hater Pipe, well because why not? Bolts straight on to your factory or aftermarket header and replaces your over pipe.

Built in Iowa at our shop. If not in stock, please allow 7-10 days build time. We are building these up always for stock but demand is high so we are a bit behind if not "in stock".

Note: Drilling is required for this product and bolts do not come with it so it is up to the consumer to provide the bolts. We do this as each header is different and you should already have the hardware you need since this replaces your current overpipe. You will also want to triple check before you cut your hood. Some headers could place the exit of the hater pipe slightly different than the included template. So you can test with the template for cutting by placing it on the pipe exit and then closing the hood and seeing how much template sticks out. If it sticks out you will need to measure and adjust your cut.

* Required Fields

Price as configured: $0.00

Description

Details

FT86SF Hater Over Pipe


Loud and Proud

Sometimes things can get a little out of hand at FT86SpeedFactory. This would be an example of one those times we fabbed up a Hood Exit Hater Pipe, well because why not? Bolts straight on to your factory or aftermarket header and replaces your over pipe. Made out of polish SUS304 stainless steel for perfection comes with a gasket and template to cut your hood for your new exhaust exit.

Drilling is required for this product and bolts do not come with it so it is up to the consumer to provide the bolts


Includes

  • Hater Over Pipe
  • Your choice of Megaphone or Muffler Tip
  • Gasket
  • Drilling Template
  • Optional Tip Plug Kit
  • Optional Trim Ring
    • Stainless
    • Black Coated Stainless
    • Carbon Fiber


NOTE:Drilling is required for this product and bolts do not come with it so it is up to the consumer to provide the bolts. We do this as each header is different and you should already have the hardware you need since this replaces your current overpipe.

You will also want to triple check before you cut your hood. Some headers could place the exit of the hater pipe slightly different than the included template. So you can test with the template for cutting by placing it on the pipe exit and then closing the hood and seeing how much template sticks out. If it sticks out you will need to measure and adjust your cut.



This Part Fits

  • 2013+ Scion FR-S FT86SF Hater Pipe
  • 2013+ Subaru BRZ FT86SF Hater Pipe
  • 2013+ Toyota GT-86 FT86SF Hater Pipe

Additional

Additional Information

Installation Instructions No
Additional Warranty Information None

Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Upload images for this product


Feel free to share pictures of your vehicle with this product!