OLM Sequential Turn Signal Mirrors Paint Matched - 2013+ FR-S / BRZ / 86

Be the first to review this product

$249.95

SKU: olm-13ft86-sq-mr

In Stock Unless Noted Below

For those that must have the latest and greatest, this is OLM's newest mirror turn signal lamp. Features a neat sequential turn signal and puddle light.
Reset Configuration

* Required Fields

$249.95

Description

Details

OLM Sequential Turn Signal Mirrors Paint Matched

For those that must have the latest and greatest, this is OLM's newest mirror turn signal lamp. Features a neat sequential turn signal and puddle light.

Modifying your vehicle is usually about achieving a better look or greater functionality. OLM's turn signal lamps offer more functions than OEM parts and have an improved look as well.

This is also an excellent opportunity for owners who do not have turn signals in their mirrors to install them.

Wiring

Currently turn signal wiring notes are available in the "additional" tab.

Be sure to read the included instructions. There are wires specifically for the sequential vs normal turn signal switch. You DO NOT want to apply POWER over these wires. They are ONLY for the switch. Doing so can cause damage to the circuit.


This Part Fits

  • 2013+ Scion FR-S OLM Sequential Turn Signal Mirrors Paint Matched
  • 2013+ Subaru BRZ OLM Sequential Turn Signal Mirrors Paint Matched
  • 2013+ Toyota GT-86 OLM Sequential Turn Signal Mirrors Paint Matched

Additional

Additional Information

Installation Instructions

Turn Signal Notes

Below are wiring diagrams from the FR-S / BRZ. Please do not let them scare you if you are not use to looking at these. The breakdown is actually quite simple.

When wiring 12v DC items, you have a positive wire (usually red) and negative (usually black). The wires supplied with these lights actually use black with white stripe for positive and black for negative. Some wires will need to be extended to reach the locations below.

The first diagram shows that the wires you will need to access are located in the driver's side, close to the door. We'll only be looking at the plug on the driver's side which has the turn signal wiring.

The wires below are located in HD1. This is the plug on the driver's side.

- The white wire is the passenger side (right) turn signal (positive).
- The yellow wire w/ green stripe is the driver's (left) turn signal (positive).

As far as ground points (for the negative), you can find an existing negative wire, use an existing bolt and eyelet grounding end, or tap into the body to ground everything.

We recommend using two ground points total. One for the driver's side wiring and one for the passenger side wiring. This prevents you from running the wires all across your cabin.

Puddle Light Notes

Be extremely careful when wiring the puddle lights to your interior circuitry. The dome lights and courtesy lights in your vehicle are controlled by a BIU which if shorted will fail. This will kill your interior lights. Take precautions like removing the ground post to your battery and letting your vehicle sit a for a few minutes before working on this. If your FR-S / 86 / BRZ, is equipped with courtesy lights in the doors, you can use this as a power source for your puddle lights. Otherwise, you can run the wiring up to your MAP / dome light.

The MAP / dome light has a 3 wire connector. The pink wire is the ground you would use for the puddle lights. This ground alternates from being 0V to 12V. By doing this it controls whether or not your light is on. For the positive wire, find an always on fuse near the kick panel of the left hand side of your vehicle (ie The STOP fuse, 7.5A, fourth from the top of the left column. Brake light circuit is always on or hot). We recommend a fuse tap or add a fuse connection here.

Additional Warranty Information None

Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Upload images for this product


Feel free to share pictures of your vehicle with this product!