These tail lights have remained out of the reach of US owners for too long. We've jumped at the opportunity to bring some stateside and make them available!
Fitted with an ultra bright array of LEDs, these are spec'd to US vehicles so installation is completely plug and play. They have reverse lights built into the assembly and include a harness which plugs into OEM wiring behind the trunk latch.
You'll immediately notice that they don't protrude from the body as much as other tail lights. This and the carbon fiber finish make them truly unique.
This product was developed by INTEC Japan to drastically change the look of the rear end of the vehicle. The tail lamps consists of 3 portions: the outer ring is brake lamp, the middle ring is the blinker, and the core center is a reverse lamp.
It was inspired by the Ferrari 458 Italia and makes the vehicle stand out in a crowd.
This Part Fits
- 2013+ Scion FR-S Paint Matched Intec Tail Light With Clear Lens
- 2013+ Subaru BRZ Paint Matched Intec Tail Light With Clear Lens
- 2013+ Toyota GT-86 Paint Matched Intec Tail Light With Clear Lens
Installation is simple as we were able to have the manufacturer wire them for US spec vehicles.
Just access the old tail light bolts (4) that secure the OEM unit to the vehicle. You will have to remove some plastic fasteners holding the carpet to the body of the vehicle. Before removing the nuts, undo all wiring. Once nuts have been removed, replace the unit with the new Intec lights. Plug in the harness and you're done.
Optionally, you can look behind the trunk latch for some additional wiring. This allows you to connect the reverse lights to the tail lights. Use the supplied harness to do this.
|Additional Warranty Information||None|
Be the first to review this product
Upload images for this product
Feel free to share pictures of your vehicle with this product!