Price is per hanger. You will need 5 to replace all of the OEM hangers.
Why do you need exhaust hangers?
When new, OEM rubber exhaust hangers are fine for the stock exhaust system. But they simply don't hold up or perform well in performance applications. Over time rubber breaks down and increases the amount of exhaust system movement. This excessive movement can damage the exhaust system as well as allow the hot tip to contact the bumper. PERRIN Polyurethane exhaust hangers are extra stiff to help keep your exhaust system in place, away from your bumper and other undercarriage parts. Most clients can install a set of hangers in less than 30 minutes with simple hand tools!
The PERRIN Polyurethane hangers are made from a special blend of polyurethane to withstand the temperature of high performance exhaust systems. In all kinds of conditions, from hot runs on a dyno, to freezing winter temps, the PERRIN exhaust hangers will outlast and outperform the stock hangers.
The stock rubber hangers are rated at a low durometer hardness of 55a. PERRIN hangers are rated at 75a to keep your exhaust under control with no additional NVH (Noise Vibration Harshness) to your car.
5 Year Warranty
PERRIN Performance warrants to the original purchaser, all PERRIN products to be free from defects in material and workmanship within a sixty (60) months period from the date of purchase. *Some exclusions apply
Fits:Scion FR-S Perrin Exhaust Hangers
Scion FRS Perrin Exhaust Hangers
Subaru BRZ Perrin Exhaust Hangers
Toyota GT-86 Perrin Exhaust Hangers
|Additional Warranty Information||No|
4 customer reviews
If you're swapping out your exhaust you might as well swap out the hangers while you're down there. Can't recommend these enough, they'll keep everything nice and tight.
good hangers very sturdy
hangers seemed sturdy and strong used them in conjunction with the kartboy extended hangers to get my exhaust off my diff but used these to keep the tips from hanging to low.
Very Nice Hangers
The Hangers are stiffer than the factory hangers but do not seem to transfer any vibration into the cabin as stated by Perrin. Not that it matters but they look much better than the factory hangers as well. I would definitely recommend these hangers.
I've been using Perrin exhaust hangers on Subarus for years. I've never seen one fail but I haven't seen stock rubber ones fail either. However, if you're trying to maintain as much ground clearance as possible these will flex a little less than the stock ones, which is why I purchased them. Keep in mind if tolerances on your exhaust is close these could potentially cause an issue. They're very close to the same size as factory but they flex less so there may be less drop in the exhaust overall. Extremely happy with the product, but just keep that in mind.
Upload images for this product
Feel free to share pictures of your vehicle with this product!