AVO Turboworld Silicone Intake Noise Tube - 2013+ FR-S / BRZ

$99.00

SKU: S6Z12E4P6REDJ

Ships From Factory

Torque Solution continues to push the limits of high performance aftermarket products with our 4ply Silicone Reinfirced Intake Hose for the Scion FR-S and Subaru BRZ. The factory intake hose is corrugated and causes air turbulence upon entering the turbo inlet. Our silicone hose smooths the air entering the throttle body which allows you to make more power. Made from Lifetime Warranty Reinforced 4ply silicone chosen specifically by Torque Solution engineers for this application you can be sure it will perform!!

*NOT CARB Compliant* Shipping to California is restricted due to not being CARB compliant.

Description

Details

AVO Turboworld Silicone Intake System

Silicone Inlet Pipes provide better flow and excellent durability compared to stock. Even on stock turbochargers the increase in air flow is welcome, and on large turbochargers they are practically necessary. Our multi-layer reinforced and wire reinforced inlets are the standard that others attempt to copy. AVO's reinforced silicone inlet kits are essential for getting the most air to the turbo.

Combine it with the AVO Power Air kit or other pod-style intake systems to provide the airflow the turbo demands. Comes in a choice of 3 colors to help you customize your engine bay. Our wire-reinforced silicone inlets for the 2001-2007 WRX and STI models was recently redesigned at the turbo side with a larger "kink", allowing for better fitment around the TGV's.

Our inlets for the newer models are as large as you can go without creating clearance issues. They come with steel adapters to match up to the stock MAF hose if necessary. 5-ply reinforced silicone construction keeps them from collapsing under pressure. Our reinforced Short Silicone Inlet Pipe fits between the stock airbox and the turbo inlet pipe. Remove the old "accordion" style hose and replacing it with our design has shown an improvement in air flow thanks to it's smooth inner design.


This Part Fits

  • 2013+ Scion FR-S AVO Turboworld Silicone Intake Noise Tube
  • 2013+ Subaru BRZ AVO Turboworld Silicone Intake Noise Tube
  • 2013+ Toyota GT-86 AVO Turboworld Silicone Intake Noise Tube

Additional

Additional Information

Installation Instructions No
Additional Warranty Information None

1 customer reviews

Average rating
(based on 1 reviews)
Ease of Installation
Fit / Quality
Overall Satisfaction
  1. Quality Noise Generator Tube

    By Joshua December 26, 2017

    This is a quick and simple install that looks much better under the hood than the factory stock tube. When I installed mine it rested slightly on the radiator tube but by rotating the silicone tube on either end slightly and then tightening the clamp it quickly gave the two tubes clearance.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Customer Product Images



Upload images for this product


Feel free to share pictures of your vehicle with this product!