Drivetrain

  • Axles
  • Clutch Lines
  • Clutch Springs
  • Clutches
  • Diff / Trans Coolers
  • Diff / Trans Mounts
  • Differentials
  • Driveshafts
  • Final Drive
  • Flywheels
  • Gear Sets
  • Oil
  • Reverse Lockouts
  • Shift Springs
  • Shifter Bushings
  • Short Shifters

New
Set Ascending Direction

Grid List

10 per page

6 Item(s)

  1. Driveshaft Shop Direct Bolt-In 800hp Rear Axles - 2013+ FR-S / BRZ / 86 Driveshaft Shop Direct Bolt-In 800hp Rear Axles - 2013+ FR-S / BRZ / 86

    Driveshaft Shop Direct Bolt-In 800hp Rear Axles - 2013+ FR-S / BRZ / 86

    $1,049.98
    Many of us have all been anticipating this car for some time. Its a collaboration from two leading Japanese manufacturers and it seems that they took some of the best parts from both and made one incredible car. The boxer engine from Subaru, the diff is very similar to the 86-92 Supra from what Driveshaft have gathered, and its RWD. What more could you ask for? Driveshaft have been working with some of the top Drift teams on this set of axles and are happy to announce the new 800HP Level 4 axles. NOTE: Sold as a pair.
  2. SALE

    Driveshaft Shop Carbon Fiber Driveshaft (AT) - 2013+ FR-S / BRZ Driveshaft Shop Carbon Shaft - AT

    SALE

    Driveshaft Shop Carbon Fiber Driveshaft (AT) - 2013+ FR-S / BRZ

    $944.99

    $999.99

    The 1-piece carbon driveshaft for the Automatic Transmission Scion FR-S and Suabru BRZ is a complete 2.75" Carbon Fiber shaft that is approximately 1/2 the weight of the factory 2-piece driveshaft. The 1-piece carbon shaft features larger, replaceable u-joints. We had the tubing custom wound with a high modulus fiber to ensure the strength while making it small enough to clear everything under the car. All of the factory shields, plates and covers can be used without any alteration to the car at all. The ends are made from 6061-T6 aluminum. Not only will the car feel more responsive but it will also make a noticeable difference on the noise level in the car. Driveshaft Shop Aluminum Weight is 12.1lbs. Stock is 24.2lbs
  3. SALE

    Driveshaft Shop Aluminum Driveshaft (AT) - 2013+ FR-S / BRZ Driveshaft Shop Aluminum Shaft - AT

    SALE

    Driveshaft Shop Aluminum Driveshaft (AT) - 2013+ FR-S / BRZ

    $404.99

    $449.99

    The 1-piece aluminum driveshaft for the Automatic Transmission Scion FR-S and Subaru BRZ is a complete 6061-T6 3" aluminum shaft that is approximately 1/2 the weight of the factory 2-piece driveshaft. The 1-piece aluminum shaft features larger, replaceable and greaseable u-joints. By removing the factory 2-piece shaft and installing a single shaft the car will feel more responsive due to the lighter weight of the shaft and also the fact that the hanger bearing is not moving up and down during acceleration. Driveshaft Shop Aluminum Weight is 13.2lbs. Stock is 24.2lbs The aluminum portion of the driveshaft is coated to resist corrosion.
  4. SALE

    Driveshaft Shop Pro-Level Axle & Hub Kit

    SALE

    Driveshaft Shop Pro-Level Axle & Hub Kit - 2013+ FR-S / BRZ

    $1,709.99

    $1,899.00

    Many of us have all been anticipating the Scion FR-S and Subaru BRZ for some time. Its a collaboration from two leading Japanese manufacturers and it seems that they took some of the best parts from both and made one incredible car. The boxer engine from Subaru, the diff is very similar to the 86-92 Supra from what we have gathered, and its RWD. What more could you ask for? The 1000HP Pro-Level kit for the 2013+ Scion FR-S / Subaru BRZ / Toyota GT-86 is a complete rear system including both axles, hubs and OEM wheel studs. The axles feature our our aerospace grade torsional 36 spline axle bars, and a billet ball & cage inner cv with our high grade inner differential spline for the differential, and a proprietary outer CV with a larger spline. The hubs are made to accommodate the larger spline and are also able to accept the factory ABS ring. Rated to 1000HP with a 1-year warranty.
  5. SALE

    Driveshaft Shop Carbon Fiber Driveshaft (MT) - 2013+ FR-S / BRZ Driveshaft Shop Carbon Shaft - MT

    SALE

    Driveshaft Shop Carbon Fiber Driveshaft (MT) - 2013+ FR-S / BRZ

    $944.99

    $1,049.99

    The 1-piece carbon driveshaft for the Scion FR-S and Suabru BRZ is a complete 2.370" Carbon Fiber shaft that is approximately 1/2 the weight of the factory 2-piece driveshaft. The 1-piece carbon shaft features larger, replaceable u-joints. We had the tubing custom wound with a high modulus fiber to ensure the strength while making it small enough to clear everything under the car. All of the factory shields, plates and covers can be used without any alteration to the car at all. The ends are made from 6061-T6 aluminum. Not only will the car feel more responsive but it will also make a noticeable difference on the noise level in the car. Driveshaft Shop carbon fiber driveshaft weight is 12.1lbs. Stock is 24.2lbs
  6. SALE

    Driveshaft Shop Aluminum Driveshaft (MT) - 2013+ FR-S / BRZ Driveshaft Shop Aluminum Driveshaft (MT) - 2013+ FR-S / BRZ

    SALE

    Driveshaft Shop Aluminum Driveshaft (MT) - 2013+ FR-S / BRZ

    $425.24

    $472.49

    The 1-piece aluminum driveshaft for the Scion FR-S and Subaru BRZ is a complete 6061-T6 3" aluminum shaft that is approximately 1/2 the weight of the factory 2-piece driveshaft. The 1-piece aluminum shaft features larger, replaceable and greaseable u-joints. By removing the factory 2-piece shaft and installing a single shaft the car will feel more responsive due to the lighter weight of the shaft and also the fact that the hanger bearing is not moving up and down during acceleration. Driveshaft Shop Aluminum Weight is 13.2lbs. Stock is 24.2lbs The aluminum portion of the driveshaft is coated to resist corrosion.
New
Set Ascending Direction

Grid List

10 per page

6 Item(s)

Drivetrain
Minimal Price: $404.99
4.9 / 3 Review(s)