This is the best exhuast system out there for the Scion FR-S and Subaru BRZ period!
We set out to make one of the highest quality systems available that was simple and had a great sound. We have a single piece mid pipe section that is mandrel bent as needed and one of the straightest available. A V-Band clamp was used to attach the axle back portion for ease of install, and future V2 (right side single exit) and V3 (no muffler single exit) upgrade options.
You hear the exhaust when you want to, by letting the RPM's wrap out with your foot firmly on the floor, and don't hear it when cruising at 3000 RPM down the highway. It is also not overly loud when shifting normally on your morning commute to work.
To keep the ruckus down during normal driving we had to use a heavier muffler. Testing showed us that the lighter mufflers increased noise in the RPM ranges for daily commutes and is not something we wanted in our V1 system. We will have lighter exhausts for our V2 and V3 due out later this year. The number one goal for the V1 is sound and daily drive-ability, and I firmly believe that has been accomplished here.
- 2.5" T304 Stainless Pipe
- T304 Stainless Muffler
- Minimal bends, as straight as possible
- 4" Stainless Angle Cut tips
- Made in the U.S.A (Iowa to be exact.)
- V-Band Clamp for rear section
- Up to a 7 Wheel HP Gain in the RPM range
- Up to a 3 FT LB in Torque Gain in the RPM range
- Lighter than stock exhaust system
- Fits both manual and automatic FRS / BRZ cars
- Doesn't annoy the Girlfriend / Wife
LIFETIME WARRANTY FOR ORIGINAL OWNERVideos and pictures are of non-resonated unit. All Black Systems are built to order.
REV with Stock Front Pipe
Dyno with Stock Front Pipe
In Car with Stock Front Pipe
Drive By with Stock Front Pipe
Stationary Rev with Invidia Catless Front Pipe
Drive By with Invidia Catless Front Pipe
In Car with Invidia Catless Front Pipe
Customer Video - Invidia Catless Front Pipe and our exhaust:
Customer Video - Stock except for the V1:
This Part Fits
- 2013+ Scion FR-S FT-86 SpeedFactory V1 Resonated (Black)
- 2013+ Subaru BRZ FT-86 SpeedFactory V1 Resonated (Black)
- 2013+ Toyota GT-86 FT-86 SpeedFactory V1 Resonated (Black)
|Additional Warranty Information||No|
You might also like...
As low as: $2,280.00
1 customer reviews
Just installed the V1 resonated catback today. It is EXACTLY the sound I was looking for, when paired with the FT86 catted header. Deep, rumbly, somehow manages to be loud and aggressive when accelerating but quiet at the same RPMs when cruising. Black powder coat looks great - stealthy vibe. Hardware was excellent except I couldn't get the included bolts to work on the midpipe connection, so just used the OEM ones. Thanks FT-86.
Upload images for this product
Feel free to share pictures of your vehicle with this product!